Latest products
Front Axle Mounting Plate
Beetle (not1302 en 1303)Karmann GhiaKübel (Thing)..
4.76€ Incl. VAT* Ex Tax: 3.93€
Turn indicator switch 8.67-7.71 (Top-quality)
Beetle 8.67-7.70 Karmann 8.67-7.71 T3 8.67-7.69..
120.95€ Incl. VAT* Ex Tax: 99.96€
Clutch pressure plate, heauvy duty, 200mm, 771 kg / 1700 lb (KEP)
771 kg / 1700 lb If the engine power increases you can go get the clutch problems, this will spin..
279.90€ Incl. VAT* Ex Tax: 231.32€
Crank case AS41, case 90 mm / stroke 69 mm (1600cc)
Bore case ø 90 mmÖlkanäle (Ölkühler/-Pumpe) ø 10 mmStehbolzen Zylinderkopf ø 8 mmÖlsieb Aufnahme ø 1..
1,159.00€ Incl. VAT* Ex Tax: 957.85€
Sun visor clips, gray, 8.64-7.67
Beetle, Karmann 8.64-7.67Bus T2 8.67-7.79..
6.65€ Incl. VAT* Ex Tax: 5.50€
Sun visor clips, ivory, 8.64-7.67
Beetle, Karmann 8.64-7.67Bus T2 8.67-7.79..
9.05€ Incl. VAT* Ex Tax: 7.48€
Cylindrical Allen bolts
Length: 20 mmMaterial: Galvanized steelThread size: M8 x 1.25Key size: 5 mmTensile load: 8.8..
1.36€ Incl. VAT* Ex Tax: 1.12€
Grommet, brake line, rear, Bus T2
Bus T2 8.67-7.792 pieces required.Attention:Pre-cut the grommet for assembly andthen pressaround the..
4.18€ Incl. VAT* Ex Tax: 3.45€
BRM high gloss black 5.5x15""
5.5 x 15 - offset +20 - PCD 5 x 112 With bolts...
149.90€ Incl. VAT* Ex Tax: 123.88€
Transaxle Adapter, Beetle and Karmann Ghia
With this adapter it is possible toinstall afully synchromesh gearbox manufacturedafter61-72 (withou..
25.95€ Incl. VAT* Ex Tax: 21.45€
Headlight HELLA Bilux 8.73-
Headlight Bilux 8.73- Piece. Beetle 8.73- (1-Lochbef.) Typ 181 (Kübel) 8.73-1..
65.00€ 95.95€ Incl. VAT* Ex Tax: 53.72€
Pressure spring, generator coal, 6/12V
for 6/12 Volt generatorBeetle, Karmann Ghia 1.54-Bus T1 1.54-Bus T1 Brasil .57- .75Type 3 4.61-7.73..
2.98€ Incl. VAT* Ex Tax: 2.46€
Spacer ring, king pin, 28.4mm
Bus T1 9.62-7.67(from chassis no. 999305- on)Bus T1 Brasil .63- .75..
30.30€ Incl. VAT* Ex Tax: 25.04€
Thrust washer, king pin, 63-67
2 pieces required per king pinMaterial: FiberBus T1 8.63-7.67Bus T1 Brasil .63- .75..
3.95€ Incl. VAT* Ex Tax: 3.26€
Beading, Hatchback-/engine-lid-hinge
Engine-lid hinge (for piano hinge)Bus T1 -2.55Hatchback hinge (for piano hinge)Bus T1 -7.63Bus T1 Br..
26.23€ Incl. VAT* Ex Tax: 21.68€
Bushing set, pedal assembly, Bus T1, 3.55-7.79
3-piece brass bushing set for thepedal assemblyBus T1 3.55-7.67Bus T1 Brasil .57- .75Bus T2 8.67-7.7..
25.95€ Incl. VAT* Ex Tax: 21.45€
Jet gauge, 1.50-3.00 mm
16-piece, with hardened steel pins, wrapped in plastic slats1,50 / 1,60 / 1,70 / 1,80 / 1,90 /2,00 /..
14.95€ Incl. VAT* Ex Tax: 12.36€
Jet gauge, 0.45-1.50mm
20-piece, with hardened steel pins, wrapped in plastic slats0.45 / 0.50 / 0.55 / 0.60 / 0.65 /0.70 /..
14.95€ Incl. VAT* Ex Tax: 12.36€
Felt seal, oil dip stick
Replacement felt seal for the oil dipstick ..
0.92€ Incl. VAT* Ex Tax: 0.76€
Plug, rear panel/hatchback/floor panel
8x1mm for the rear panelBeetle 8.67- 2 pieces for the floor panelBus T2 8.67-7.79 2 pieces for the h..
0.33€ Incl. VAT* Ex Tax: 0.27€
Grommet, engine tin/body, 31mm
Engine tinsBeetle, Karmann Ghia 1.3-1.6Bus T2 1.6-2.0Type 4 1.7-1.8and universal for openings in the..
3.66€ Incl. VAT* Ex Tax: 3.03€
Guide, return spring, 8.71-
Diameter: 20mmBeetle, Karmann Ghia 1.2-1.6 8.71-Type 181 (Thing) 1.68.71-12.79Type 3 1.5-1.6 8.71-7...
7.93€ Incl. VAT* Ex Tax: 6.55€
Clutch pressure plate, 1.2-1.3, 180 mm, , 8.70-
rebuilt for guided release bearingBeetle 1.2 1.72-12.79Beetle 1.3 8.70- 7.75Karmann Ghia 1.2 1.72- 7..
50.00€ 60.81€ Incl. VAT* Ex Tax: 41.32€